There are tons of ways to make miniature tiles, usually involving Fimo or paper coated with a thick glossy agent, but I think I’ve stumbled on a method that’s easier and more fun…as long as you’re okay with tiles in random shapes. Best of all, it’s a way to recycle and upcycle common items.
Behold! (Ha, ha.) A protein snack that recycles into a table with mosaic inlays or a birdbath.
SUPPLIES for the MOSAICS:
A hard-boiled egg. (an old one is best, if it float when it’s raw, that’s wonderful because that means the inner shell membrane has pulled away from the shell)
 |
| In the upper right, you can see some of the various eggshell pieces that I colored. Don’t despair if you miss a piece or two! A white “tile” here and there will look cool. In the lower left is a finished mosaic table top. By putting big pieces of shell on the glue and then breaking the big pieces and moving them around, you save yourself a lot of aggravation trying to glue down smaller pieces. |
Waxed paper.
Acrylic paints(and brush) or markers.
METHOD:
1. Roll your hard-boiled egg on a surface and gently peel away the shell. Set on the waxed paper.
2. Let the shell dry. Check that the membrane is dry.
3. Color the shell with the marker or paints. A variety of shades will work best.
4. Let dry.
 |
| Supplies for the birdbath. You can also see the weird little plastic stand that’s supposed to be some sort of a kid’s party favor. (Beats me!) Oh, and you can save the lid. Use the foil side as a mirror somewhere else.) |
Blogger won’t let me edit the caption above, but you’ll use the same base as shown there for the mosaic table.
SUPPLIES FOR THE MOSAIC TABLE:
1. Small plastic base. (I used some sort of weird kid’s party favor that came in a bag of six or so from the Dollar Store. I have NO idea what a kid is supposed to do with one of these! If you can’t find these, you could stack beads or use a wooden turning or a spool from thread or even make something out of Fimo.)
2. Emery board.
3. Round disk. (You can use chipboard, foam, or wood.)
4. Tacky glue.
5. Acrylic paint. (White)
6. Glue spreader. (I like coffee stirrers from Starbucks.)
7. Gold nail polish.
8. Clear nail polish.
9. X-acto Knife
10. Gold trim if desired.
METHOD:
1. Chip off that weird half circle loop on the side of your plastic stand. (Save it. It makes a great handle when painted. I used cuticle clippers to cut mine off.)
2. Sand the stand smooth.
3. Paint the one flat surface of the round disk white.
4. Paint the stand, the other flat surface of your disk and the edge of the disk with gold nail polish. (You will probably need to put on two coats, especially on the plastic. Thin coats work best.) You can add gold trim to the outside edge/rim, if desired. (For example, a thin gold braid or cord.)
5. When all parts are dry, smear thin layer of tacky glue on a quarter of the white side of the disk.
6. With tweezers, pick up some of the eggshells. Push them color side up into the glue.
7. With your X-acto knife, press down. This will break apart the shells. Move the pieces far enough apart that you can add pieces of a different color.
8. Repeat with a different color until surface is covered.
9. Let dry.
10. Paint with a thin layer of clear nail polish. Be careful! If you use too much, the colors might run. You are aiming to put down a coating so this won’t happen.
11. Add a thicker layer.
12. Glue the mosaic top to the plastic stand.
13. Admire.
VARIATION FOR BIRDBATH:
ADDITIONAL SUPPLY: Metal jelly or honey tub. (Mine came from a lunch at Cracker Barrel.)
1. Prepare the mosaic tiles as per above.
2. Paint the tub and the stand as per above.
3. Add eggshells as per above, but with this difference–when you get to a curve or an edge, you can put glue on the flat side and glue on the edge, then add a piece of eggshell that OVERLAPS the flat side and smoosh into the edge or curve.
4. Assemble.
5. Admire greatly.
VARIATION FOR SCRAPBOOKERS OR CARDMAKERS:
1. Prepare the mosiacs (colored eggshells) as above.
2. Glue them to chipboard letters or glue them around a mat on a photo.
3. Or glue them to a long strip of paper and use as a decorative border.
This is my FIRST miniatures tutorial. I know it’s a little skimpy on the photos, but otherwise, how did I do?
